Medida Pneus max Aplicar no Disco I

[fernando_castro]

Tenho um disco I de 95 5portas. Neste momento tem uk kit de molas com mais 2'' e amortecedores. Qual a medida de pneus que posso montar sem ter de cortar nada?

estava a pensar nuns 265/70 R16, é possível?

[FLG]

Viva "fernando_castro"

aí vaí:

Tire fitment guide:
Discovery


235/70-16: Stock tire size.

205/80-16: Stock size in many other countries. same height as 235/70-16.

255/65-16: same height as stock

225/75-16: little taller than stock

245/70-16: little taller and wider than the stock size. reportedly, no need for lift, just minor trimming to fit those tires.

245/75-16: popular size for OME suspension lifted vehicles. require slight trimming on the rear wheel well fender, and may also call for adjustment on the steering bumpstops.

215/85-16: same height as 245/75-16. but narrower. seems to be preferred for the snow and mud.

265/70-16: about as tall as 245/75-16, but wider. will require more trimming and steering bump stops adjustments along with taller bump stops over the rear axle.

265/75-16: almost 32" tall. Same as stock NAS D90 tires. Will require even more trimming.

235/85-16: same height as 265/75-16 but narrower. And seems to be the most popular size with OME lift.

255/85-16: about 33" tall...very few people have fitted this size. Lots of butchering for this one.

285/75-16: about 33" also... but very very wide.

[mcsarria]

Caro colega.
No meu primeiro disco que tive era um 200 de 92 e meti a molas mais 2 polgadas e tive os BF Mud 245/75/16 e ficou ou xou.Mas depois comecei a querer mais e meti uns tacos de 3cm e os BF Mud 265/75/16 e nunca ou quase nunca tocava.
Se queres o bicho mais para mato opta pelos maiores, caso contrario os 245 com as jantes mais puxadinhas para fora mas sem sair da cava fica muito bom.
Força ai...